■ 21inc. / 22 inc.

Exclusive Multi-piece forged wheel

A new design that meets the needs of large diameters centered on the 7, 8 series and high-end X series. An uncompromising Japanese-made multi-piece wheel with a high-quality design that expresses sportiness and strength with forged dis and flow-forming rims.

BRUSHED BLACK(BRB)


DISC:Brushed x black anodized
RIM:Black alumite (diamond cut)

■ 21/22 inc rim compatible

21 inc is full reverse rim,
22 inc is step rim specification
Accommodates a wide range of sizes.




BRUSHED CLEAR(BUA)


DISC:Brushed x tint clear paint
RIM:Clear alumite (diamond cut)



■ Order inset in mm

Inset in mm on request
It is possible to order.
(The range of insets that can be
manufactured is shown in the table below.)
Manufacturable size
21 inc 8.5J ~ 11.5J 
22 inc 8.5J ~ 12.5J

*Because brushed black is an anodized aluminum color, there is unavoidable color unevenness due to the metal structure.
*Because Brushed Clear is a candy color, there may be slight shades of color depending on the production lot.

■21inc.

Size Inset
21 8.5J 22(55)~14(63)
9.0J 28(55)~8(75)
9.5J 34(55)~2(87)
10.0J 41(55)~-5(101)
10.5J 47(55)~-11(113)
11.0J 53(55)~-17(125)
11.5J 60(55)~-24(139)

The inset ( ) is the depth of the center cap surface, the larger the number, the deeper.
Bolt hole: 5 holes P.C.D.112mm Hub diameter: 66.6mm.
Accessories: Center emblem, air valve each one Note: Wheel bolts are not included.

■22inc.

Size Inset
22 8.5J 22(55)~-8(85)
9.0J 28(55)~-14(97)
9.5J 34(55)~-20(109)
10.0J 41(55)~-27(123)
10.5J 47(55)~-33(135)
11.0J 53(55)~-39(147)
11.5J 60(55)~-46(161)
12.0J 66(55)~-52(173)
12.5J 61(66)~-58(185)

■ 20inc.

3DDesign 10 10th anniversary model. It was designed by 3DDesign, made by BBS, and it is mono block forged wheel.
The wheels and are sized 9.5J x20 IS25 and 10.5×20 IS35 for F80M3 and F82 M4. Two colors are available – Gold and Diamond Black.

■Gold / ■Diamond Black.

-Gold sold out-
Size ET HOLE P.C.D Part/n Description
20 9.5J 25 5 120 2050-951251/2
10.5J 35 5 120 2050-051351/2

Parts included: Air Valve Stem, 3D Center Cap, bolts.

TYPE III FORGED 20 inc.


■Gloss Black


■Brushed


■Bi color


■Matte Black

The Type III is forged wheel built by Japan. With outstanding strength to weight ratio and clean design.

■ Bi color / Matte Black / Gloss Black

Size ET FACE HOLE P.C.D Part/n Description
20 8.5J +35 FACE2 5 120 2040-851353
9.0J +42 FACE2 5 120 2040-901421/3
10.0J +43 FACE3 5 120 2040-001431/3

Size ET FACE HOLE P.C.D Part/n Description
20 8.5J +35 FACE2 5 112 2070-851351/5
9.0J +45 FACE2 5 112 2070-901451/5
10.0J +43 FACE3 5 112 2070-001431/5
・Part number end 1=Bi color/ 3=Matte Black/ 5=Gloss Black
Accessories: One center emblem, one air valve Note: Wheel bolts are not included
* 1… Please contact us as long bolts may be required separately.

■ Brushed

Size ET FACE HOLE P.C.D Part/n Description
20 8.5J +35 FACE2 5 112 2070-851354
9.0J +45 FACE2 5 112 2070-901454  
10.0J +43 FACE3 5 112 2070-001434  
Parts included: Air Valve Stem, 3D Center Cap.
Note: BMW original wheel bolt must be used. BMW TPMS sensor compatible.
(*1): long bolts are required.

TYPE III FORGED 19 inc.

Super light weight, 19lbs at 9.5x19.

Bi color(PCD120)

Size ET FACE HOLE P.C.D Part/n Description
19 8.5J +35 FACE1 5 120 2049-851351
+45 FACE1 5 120 2049-851451
9.5J +43 FACE2 5 120 2049-951431

Matte Black(PCD120)

Size ET FACE HOLE P.C.D Part/n Description
19 8.5J +35 FACE1 5 120 2049-851353
+45 FACE1 5 120 2049-851453
9.5J +43 FACE2 5 120 2049-951433

Matte GunMetalic(PCD112)

Size ET FACE HOLE P.C.D Part/n Description
19 8.0J +50FACE0 5112 2079-801506


Accessories: One center emblem, one air valve Note: Wheel bolts are not included
* 1… Please contact us as long bolts may be required separately. * 2BMW TPMS sensor compatible.

Spacer (19 inch 20 inch)

Aluminum spacer for Type 3 forged, it can be secured to the wheel with screw.

PCD/Hole Hub Thickness Part/n
120/5H 72.5 8mm 2001-010081
10mm 2001-010101
12mm 2001-010121
15mm 2001-010151
112/5H 66.6 5mm 2001-012051
10mm Coming soon
15mm 2001-012151
Note: cannot be used with other wheels
* 1 When using a spacer, a long bolt is required.

Application: Most BMW models.

Brombacher wheels for BMW are unique and original and the official wheels of 3D Design. Brombacher wheels are made in Japan.

Brombacher / Matte Black 19 inc.

Size ET HOLE P.C.D Description
19 8.0JJ +46 5 120  
8.5JJ +15 5 120  
8.5JJ +27 5 120  
8.5JJ +35 5 120  
9.0JJ +54 5 120  
9.5JJ +22 5 120  
9.5JJ +27 5 120  
9.5JJ +35 5 120  

Parts included: Air Valve Stem
Note: BMW original wheel bolt must be used. BMW TPMS sensor compatible.
Sold Seperately: 3D Center Cap JPY2,500/pc. Available in silver and matte black (pictured above on wheel).

OPTION

3D Logo Ornament Center Cap

he 3D Design logo ornament can be put on the center cap.
MSRP: JPY 2,500/pc

Some BMW center cap installed on the 3D Design logo ornament.